Description

Custom made boards ?

The market for magnetic whiteboards, chalkboard and bulletin boards offers a wide range of products in the most popular sizes. However thanks to the feedback we receive from our customers we know that this is not enough.

Very often, buyers are looking for boards in different dimensions than those available as a standard size. If you are one of those customers, discover our offer of customised boards and tell us what product will best suits your needs!

The advantages of custom-made board:

• Possibility to choose from different types of frames
• Ideal for unusual spaces and special projects
• Manufacturer’s Warranty!

Boards with custom print ✏️

Additional option to creating boards with specific dimensions, we also offer the possibility of making a personalized print– it could be a company logo, a calendar, a photo also a grid or ruled surface, these are just a few examples.

Advantages of custom-printed boards:

• High-quality print resistant to abrasion and fading
• Professional application according to your project and your needs
• Manufacturer’s warranty!
• Practically no project limits

Magnetic glass board

• SURFACE – magnetic surface made of 4mm tempered glass. Has bevelled edges and corners cut off at a straight angle. The colour layer positioned underneath does not fade and maintains the same quality for years
• MODERN DESIGN – The glass board is characterized by its modern and extravagant design and is ideally suited as a wall decoration in any type of space
• USE – The glass board is suitable for attaching notes with magnets and can also be written on with whiteboard, glass and chalk markers without the colour fading. Important note: The colour glass boards can only be written on with glass markers
• MOUNTING – The board can be mounted vertically or horizontally on the wall and protrudes approx. 5mm from the wall. To mount this board you will require corresponding dowels to protrude from the surface on which the board is to be hanged. Dowels are not included
• MAGNETS – Only neodymium magnets are suitable for the glass boards. Decorative magnets (commemorative/fridge magnets) are not strong enough for the glass magnetic boards

The board surface is made of tempered glass (4mm thick). It has sanded edges to right eagle.

The glass is thermally toughened. As a result no sharp-edged fragments are created. In the event of a breakage  the risk of any cuts and impact injuries is reduced, since the glass breaks down into many small, slightly rounded and far less dangerous fragments.

The glass board can be mounted vertically or horizontally on the wall and protrudes approx. 5mm from the wall.

Similar to other common fastening systems, such as cabinets hanging in the kitchen, the boards are placed on rails from the size of 120×90 cm, which are included.

The glass board can be also easily and securely attached to plaster board by using appropriate dowels. However when hanging at plasterboard only dedicated dowels which withstand the tension are suitable.

For other types of walls such as autoclaved aerated concrete, concrete or brick, plugs and screws with countersunk heads with a head diameter of 7-8 mm are required. Accurate adherence to information provided is key. If the screw head is too small, the glass board may come off it, while if the screw head is too large, the screw head will not fit into the hole punched in the glass plate.

Note: dowels are not included.

The colour layer is positioned under the glass so  it does not fade and maintains its quality.

Only use dedicated neodymium magnets with suitable magnetic power which can penetrate the glass layer and hit the back wall. Decorative magnets (commemorative) in most cases do not remain on the glass magnetic board.